From 90cae29923a2954b147d64cb348f842b49b65608 Mon Sep 17 00:00:00 2001 From: Bram Prieshof Date: Tue, 28 May 2019 21:38:10 +0000 Subject: [PATCH] 'debian-generic-preseed.txt' verwijderen --- debian-generic-preseed.txt | 277 ------------------------------------- 1 file changed, 277 deletions(-) delete mode 100644 debian-generic-preseed.txt diff --git a/debian-generic-preseed.txt b/debian-generic-preseed.txt deleted file mode 100644 index a2048fb..0000000 --- a/debian-generic-preseed.txt +++ /dev/null @@ -1,277 +0,0 @@ -#### Contents of the preconfiguration file (for stretch) -### Localization -# Preseeding only locale sets language, country and locale. -#d-i debian-installer/locale string en_US - -# The values can also be preseeded individually for greater flexibility. -d-i debian-installer/language string nl -d-i debian-installer/country string NL -d-i debian-installer/locale string nl_NL.UTF-8 -# Optionally specify additional locales to be generated. -#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8 - -# Keyboard selection. -d-i keyboard-configuration/xkb-keymap select us -# d-i keyboard-configuration/toggle select No toggling - -### Network configuration -# Disable network configuration entirely. This is useful for cdrom -# installations on non-networked devices where the network questions, -# warning and long timeouts are a nuisance. -#d-i netcfg/enable boolean false - -# netcfg will choose an interface that has link if possible. This makes it -# skip displaying a list if there is more than one interface. -d-i netcfg/choose_interface select auto - -# To pick a particular interface instead: -#d-i netcfg/choose_interface select eth1 - -# To set a different link detection timeout (default is 3 seconds). -# Values are interpreted as seconds. -#d-i netcfg/link_wait_timeout string 10 - -# If you have a slow dhcp server and the installer times out waiting for -# it, this might be useful. -#d-i netcfg/dhcp_timeout string 60 -#d-i netcfg/dhcpv6_timeout string 60 - -# If you prefer to configure the network manually, uncomment this line and -# the static network configuration below. -#d-i netcfg/disable_autoconfig boolean true - - -# Any hostname and domain names assigned from dhcp take precedence over -# values set here. However, setting the values still prevents the questions -# from being shown, even if values come from dhcp. -d-i netcfg/get_hostname string Thin-Client -d-i netcfg/get_domain string - -# If you want to force a hostname, regardless of what either the DHCP -# server returns or what the reverse DNS entry for the IP is, uncomment -# and adjust the following line. -#d-i netcfg/hostname string somehost - -# Disable that annoying WEP key dialog. -d-i netcfg/wireless_wep string -# The wacky dhcp hostname that some ISPs use as a password of sorts. -#d-i netcfg/dhcp_hostname string radish - -# If non-free firmware is needed for the network or other hardware, you can -# configure the installer to always try to load it, without prompting. Or -# change to false to disable asking. -#d-i hw-detect/load_firmware boolean true - -### Network console -# Use the following settings if you wish to make use of the network-console -# component for remote installation over SSH. This only makes sense if you -# intend to perform the remainder of the installation manually. -#d-i anna/choose_modules string network-console -#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key -#d-i network-console/password password r00tme -#d-i network-console/password-again password r00tme - -### Mirror settings -# If you select ftp, the mirror/country string does not need to be set. -#d-i mirror/protocol string ftp -d-i mirror/country string manual -d-i mirror/http/hostname string ftp.nl.debian.org -d-i mirror/http/directory string /debian -d-i mirror/http/proxy string - -# Suite to install. -#d-i mirror/suite string testing -# Suite to use for loading installer components (optional). -#d-i mirror/udeb/suite string testing - -### Account setup -# Skip creation of a root account (normal user account will be able to -# use sudo). -#d-i passwd/root-login boolean false -# Alternatively, to skip creation of a normal user account. -d-i passwd/make-user boolean false - -# Root password, either in clear text -#d-i passwd/root-password password r00tme -#d-i passwd/root-password-again password r00tme -# or encrypted using a crypt(3) hash. -#d-i passwd/root-password-crypted password [crypt(3) hash] - - -### Clock and time zone setup -# Controls whether or not the hardware clock is set to UTC. -d-i clock-setup/utc boolean true - -# You may set this to any valid setting for $TZ; see the contents of -# /usr/share/zoneinfo/ for valid values. -d-i time/zone string Europe/Amsterdam - -# Controls whether to use NTP to set the clock during the install -d-i clock-setup/ntp boolean true -# NTP server to use. The default is almost always fine here. -#d-i clock-setup/ntp-server string ntp.example.com - -### Partitioning -## Partitioning example -# If the system has free space you can choose to only partition that space. -# This is only honoured if partman-auto/method (below) is not set. -#d-i partman-auto/init_automatically_partition select biggest_free - -# Alternatively, you may specify a disk to partition. If the system has only -# one disk the installer will default to using that, but otherwise the device -# name must be given in traditional, non-devfs format (so e.g. /dev/sda -# and not e.g. /dev/discs/disc0/disc). -# For example, to use the first SCSI/SATA hard disk: -#d-i partman-auto/disk string /dev/sda -# In addition, you'll need to specify the method to use. -# The presently available methods are: -# - regular: use the usual partition types for your architecture -# - lvm: use LVM to partition the disk -# - crypto: use LVM within an encrypted partition -d-i partman-auto/method string regular - -# If one of the disks that are going to be automatically partitioned -# contains an old LVM configuration, the user will normally receive a -# warning. This can be preseeded away... -#d-i partman-lvm/device_remove_lvm boolean true -# The same applies to pre-existing software RAID array: -d-i partman-md/device_remove_md boolean true -# And the same goes for the confirmation to write the lvm partitions. -d-i partman-lvm/confirm boolean true -d-i partman-lvm/confirm_nooverwrite boolean true - -# You can choose one of the three predefined partitioning recipes: -# - atomic: all files in one partition -# - home: separate /home partition -# - multi: separate /home, /var, and /tmp partitions -d-i partman-auto/choose_recipe select atomic - - - -# This makes partman automatically partition without confirmation. -d-i partman-md/confirm boolean true -d-i partman-partitioning/confirm_write_new_label boolean true -d-i partman/choose_partition select finish -d-i partman/confirm boolean true -d-i partman/confirm_nooverwrite boolean true - -## Controlling how partitions are mounted -# The default is to mount by UUID, but you can also choose "traditional" to -# use traditional device names, or "label" to try filesystem labels before -# falling back to UUIDs. -#d-i partman/mount_style select uuid - -### Base system installation -# Configure APT to not install recommended packages by default. Use of this -# option can result in an incomplete system and should only be used by very -# experienced users. -#d-i base-installer/install-recommends boolean false - -# The kernel image (meta) package to be installed; "none" can be used if no -# kernel is to be installed. -#d-i base-installer/kernel/image string linux-image-686 - -### Apt setup -# You can choose to install non-free and contrib software. -d-i apt-setup/non-free boolean true -d-i apt-setup/contrib boolean true - -# Uncomment this to add multiarch configuration for i386 -#d-i apt-setup/multiarch string i386 - - -### Package selection -tasksel tasksel/first multiselect standard - -# Individual additional packages to install -d-i pkgsel/include string openssh-server xorg chromium openbox lightdm nedit locales spacefm sudo gmessage unattended-upgrades plymouth plymouth-themes - -# Some versions of the installer can report back on what software you have -# installed, and what software you use. The default is not to report back, -# but sending reports helps the project determine what software is most -# popular and include it on CDs. -#popularity-contest popularity-contest/participate boolean false - -### Boot loader installation -# Grub is the default boot loader (for x86). If you want lilo installed -# instead, uncomment this: -#d-i grub-installer/skip boolean true -# To also skip installing lilo, and install no bootloader, uncomment this -# too: -#d-i lilo-installer/skip boolean true - - -# This is fairly safe to set, it makes grub install automatically to the MBR -# if no other operating system is detected on the machine. -d-i grub-installer/only_debian boolean true - -# This one makes grub-installer install to the MBR if it also finds some other -# OS, which is less safe as it might not be able to boot that other OS. -d-i grub-installer/with_other_os boolean true - -# Due notably to potential USB sticks, the location of the MBR can not be -# determined safely in general, so this needs to be specified: -#d-i grub-installer/bootdev string /dev/sda -# To install to the first device (assuming it is not a USB stick): -#d-i grub-installer/bootdev string default - - -# Use the following option to add additional boot parameters for the -# installed system (if supported by the bootloader installer). -# Note: options passed to the installer will be added automatically. -#d-i debian-installer/add-kernel-opts string nousb - -### Finishing up the installation -# During installations from serial console, the regular virtual consoles -# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next -# line to prevent this. -#d-i finish-install/keep-consoles boolean true - -# Avoid that last message about the install being complete. -d-i finish-install/reboot_in_progress note - -# This will prevent the installer from ejecting the CD during the reboot, -# which is useful in some situations. -#d-i cdrom-detect/eject boolean false - -# This is how to make the installer shutdown when finished, but not -# reboot into the installed system. -#d-i debian-installer/exit/halt boolean true -# This will power off the machine instead of just halting it. -#d-i debian-installer/exit/poweroff boolean true - -### Preseeding other packages -# Depending on what software you choose to install, or if things go wrong -# during the installation process, it's possible that other questions may -# be asked. You can preseed those too, of course. To get a list of every -# possible question that could be asked during an install, do an -# installation, and then run these commands: -# debconf-get-selections --installer > file -# debconf-get-selections >> file - - -#### Advanced options -### Running custom commands during the installation -# d-i preseeding is inherently not secure. Nothing in the installer checks -# for attempts at buffer overflows or other exploits of the values of a -# preconfiguration file like this one. Only use preconfiguration files from -# trusted locations! To drive that home, and because it's generally useful, -# here's a way to run any shell command you'd like inside the installer, -# automatically. - -# This first command is run as early as possible, just after -# preseeding is read. -#d-i preseed/early_command string anna-install some-udeb -# This command is run immediately before the partitioner starts. It may be -# useful to apply dynamic partitioner preseeding that depends on the state -# of the disks (which may not be visible when preseed/early_command runs). -#d-i partman/early_command \ -# string debconf-set partman-auto/disk "$(list-devices disk | head -n1)" -# This command is run just before the install finishes, but when there is -# still a usable /target directory. You can chroot to /target and use it -# directly, or use the apt-install and in-target commands to easily install -# packages and run commands in the target system. -d-i preseed/late_command string \ -in-target wget -O /root/Setup-TC-Generic-Kiosk.sh https://git.ictmaatwerk.com/bprieshof/Linux-scripts/raw/branch/master/tc/Setup-TC-Generic-Kiosk.sh ; \ -in-target bash /root/Setup-TC-Generic-Kiosk.sh -