Images -> img. Minor tweaks.

README.md

@@ -15,12 +15,12 @@ Run the following command on the Raspberry Pi:
 Little Backup Box supports three backup modes:
 
 - **Card backup** Automatically backs up the contents of a storage card to an external storage device.
-- **Camera backup** Transfers photos, raw files, and videos from the camera connected directly to the Raspberry Pi. The transferred files are saved in the */home/pi/[CAMERA MODEL]* directory on the system storage card. **Important** Make sure that the camera is set to the MTP USB connection mode.
+- **Camera backup** Transfers photos, raw files, and videos from the camera connected directly to the Raspberry Pi. The transferred files are saved in the */home/pi/BACKUP/[CAMERA MODEL]* directory on the system storage card. **Important** Make sure that the camera is set to the MTP USB connection mode.
 - **Remote control** Provides a simple web interface to manually choose one of the two modes described above.
 
 During the installation, choose the desired mode from the selection dialog.
 
-<img src="installer.png" alt="" width="600"/>
+<img src="img/installer.png" alt="" width="600"/>
 
 When prompted, reboot the Raspberry Pi.
 
@@ -49,7 +49,9 @@ The exact steps depend on the backup mode.
 1. Point the browser to *http://[IP-ADDRESS]:8080* (replace *[IP-ADDRESS]* with the actual IP address of the Raspberry Pi)
 2. Start the desired backup mode by pressing the appropriate button.
 
-<img src="rc.png" alt="" width="375"/>
+<img src="img/rc.png" alt="" width="375"/>
+
+The remote control mode gives you access to the **Device backup** action that backs up the */home/pi/BACKUP* folder on the Raspberry Pi to an external storage device.
 
 ## Problems?
 

install-little-backup-box.sh

@@ -32,7 +32,7 @@ WIDTH=40
 CHOICE_HEIGHT=4
 BACKTITLE="Little Backup Box"
 TITLE="Backup mode"
-MENU="Select the desired backup mode:"
+MENU="Select the default backup mode:"
 
 OPTIONS=(1 "Remote control"
          2 "Card backup"

scripts/camera-backup.sh

@@ -18,7 +18,7 @@
 # to install the required packages and configure the system.
 
 # Specify a storage device and its mount point
-HOME_DIR="/home/pi" # Home directory path
+HOME_DIR="/home/pi/BACKUP" # Home directory path
 SHUTD="5" # Minutes to wait before shutdown due to inactivity
 
 # Set the ACT LED to heartbeat