Remove device-backup.sh

scripts/device-backup.sh

@@ -1,59 +0,0 @@
-#!/usr/bin/env bash
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# IMPORTANT:
-# Run the install-little-backup-box.sh script first
-# to install the required packages and configure the system.
-
-# Specify devices and their mount points
-# and other settings
-STORAGE_DEV="sda1" # Name of the storage device
-STORAGE_MOUNT_POINT="/media/storage" # Mount point of the storage device
-SOURCE_DIR="/home/pi/BACKUP/"
-SHUTD="5" # Minutes to wait before shutdown due to inactivity
-
-# Set the ACT LED to heartbeat
-sudo sh -c "echo heartbeat > /sys/class/leds/led0/trigger"
-
-# Shutdown after a specified period of time (in minutes) if no device is connected.
-sudo shutdown -h $SHUTD "Shutdown is activated. To cancel: sudo shutdown -c"
-
-# Wait for a USB storage device (e.g., a USB flash drive)
-STORAGE=$(ls /dev/* | grep "$STORAGE_DEV" | cut -d"/" -f3)
-while [ -z ${STORAGE} ]
-  do
-  sleep 1
-  STORAGE=$(ls /dev/* | grep "$STORAGE_DEV" | cut -d"/" -f3)
-done
-
-# When the USB storage device is detected, mount it
-mount /dev/"$STORAGE_DEV" "$STORAGE_MOUNT_POINT"
-
-# Cancel shutdown
-sudo shutdown -c
-
-# Set the ACT LED to blink at 1000ms to indicate that the storage device has been mounted
-sudo sh -c "echo timer > /sys/class/leds/led0/trigger"
-sudo sh -c "echo 1000 > /sys/class/leds/led0/delay_on"
-  
-# Perform backup using rsync
-rsync -av "$SOURCE_DIR" "$STORAGE_MOUNT_POINT"
-
-# Turn off the ACT LED to indicate that the backup is completed
-sudo sh -c "echo 0 > /sys/class/leds/led0/brightness"
-
-# Shutdown
-sync
-shutdown -h now