brammp/little-backup-box-Bram
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Remove wpa_supplicant.conf, geocorrelation, lsblk

Browse Source
This commit is contained in:
Dmitri Popov
2018-03-21 19:23:48 +01:00
parent e13e3a74bc
commit ba3dd35473
2 changed files with 2 additions and 27 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
README.md
View File

@@ -26,7 +26,7 @@ When prompted, reboot the Raspberry Pi.
## Usage
The exact backup steps depend on the backup mode.
The exact steps depend on the backup mode.
### Card backup mode
@@ -35,8 +35,6 @@ The exact backup steps depend on the backup mode.
3. Insert a storage card into a card reader and plug it into the Raspberry Pi
4. Wait till the Raspberry Pi shuts down
To geocorrelate the backed up photos, place a GPX file in the root of the storage device before plugging it into the Raspberry Pi.
**Note:** To differentiate between different storage cards, the backup script creates a datetime-based *.id* file in the root of each storage card. The name of the *.id* file is also used as the destination backup folder on the storage device.
### Camera backup mode
@@ -46,9 +44,7 @@ To geocorrelate the backed up photos, place a GPX file in the root of the storag
3. Turn the camera on
4. Wait till the Raspberry Pi shuts down
Note that the direct camera file transfer script doesn't support geocorrelation.
### Remote control mode:
### Remote control mode
1. Point the browser to *http://[IP-ADDRESS]:8080* (replace *[IP-ADDRESS]* with the actual IP address of the Raspberry Pi)
2. Start the desired backup mode by pressing the appropriate button.

21
card-backup.sh
View File

@@ -25,17 +25,6 @@ CARD_DEV="sdb1" # Name of the storage card
CARD_MOUNT_POINT="/media/card" # Mount point of the storage card
SHUTD="5" # Minutes to wait before shutdown due to inactivity
# If there is a wpa_supplicant.conf file in the root of the storage device
# Rename the original config file,
# move wpa_supplicant.conf from the card to /etc/wpa_supplicant/
# Reboot to enable networking
if [ -f "$STORAGE_MOUNT_POINT/wpa_supplicant.conf" ]; then
sudo sh -c "echo 100 > /sys/class/leds/led0/delay_on"
mv /etc/wpa_supplicant/wpa_supplicant.conf /etc/wpa_supplicant/wpa_supplicant.conf.bak
mv "$STORAGE_MOUNT_POINT/wpa_supplicant.conf" /etc/wpa_supplicant/wpa_supplicant.conf
reboot
fi
# Set the ACT LED to heartbeat
sudo sh -c "echo heartbeat > /sys/class/leds/led0/trigger"
@@ -86,19 +75,9 @@ if [ ! -z $CARD_READER ]; then
# Set the backup path
BACKUP_PATH=$STORAGE_MOUNT_POINT/"$ID"
# Log the output of the lsblk command for troubleshooting
sudo lsblk > lsblk.log
# Perform backup using rsync
rsync -av --exclude "*.id" $CARD_MOUNT_POINT/ $BACKUP_PATH
# Geocorrelate photos if a .gpx file exists
cd $STORAGE_MOUNT_POINT
if [ -f *.gpx ]; then
GPX="$(ls *.gpx)"
exiftool -overwrite_original -r -ext jpg -geotag "$GPX" -geosync=120 .
fi
# Turn off the ACT LED to indicate that the backup is completed
sudo sh -c "echo 0 > /sys/class/leds/led0/brightness"
fi