Web UI -> Remote control. Rename scripts

card-backup.sh

@@ -0,0 +1,107 @@
+#!/usr/bin/env bash
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# IMPORTANT:
+# Run the install-little-backup-box.sh script first
+# to install the required packages and configure the system.
+
+# Specify devices and their mount points
+# and other settings
+STORAGE_DEV="sda1" # Name of the storage device
+STORAGE_MOUNT_POINT="/media/storage" # Mount point of the storage device
+CARD_DEV="sdb1" # Name of the storage card
+CARD_MOUNT_POINT="/media/card" # Mount point of the storage card
+SHUTD="5" # Minutes to wait before shutdown due to inactivity
+
+# If there is a wpa_supplicant.conf file in the root of the storage device
+# Rename the original config file,
+# move wpa_supplicant.conf from the card to /etc/wpa_supplicant/
+# Reboot to enable networking
+if [ -f "$STORAGE_MOUNT_POINT/wpa_supplicant.conf" ]; then
+    sudo sh -c "echo 100 > /sys/class/leds/led0/delay_on"
+    mv /etc/wpa_supplicant/wpa_supplicant.conf /etc/wpa_supplicant/wpa_supplicant.conf.bak
+    mv "$STORAGE_MOUNT_POINT/wpa_supplicant.conf" /etc/wpa_supplicant/wpa_supplicant.conf
+    reboot
+fi
+
+# Set the ACT LED to heartbeat
+sudo sh -c "echo heartbeat > /sys/class/leds/led0/trigger"
+
+# Shutdown after a specified period of time (in minutes) if no device is connected.
+sudo shutdown -h $SHUTD "Shutdown is activated. To cancel: sudo shutdown -c"
+
+# Wait for a USB storage device (e.g., a USB flash drive)
+STORAGE=$(ls /dev/* | grep $STORAGE_DEV | cut -d"/" -f3)
+while [ -z ${STORAGE} ]
+  do
+  sleep 1
+  STORAGE=$(ls /dev/* | grep $STORAGE_DEV | cut -d"/" -f3)
+done
+
+# When the USB storage device is detected, mount it
+mount /dev/$STORAGE_DEV $STORAGE_MOUNT_POINT
+
+# Cancel shutdown
+sudo shutdown -c
+
+# Set the ACT LED to blink at 1000ms to indicate that the storage device has been mounted
+sudo sh -c "echo timer > /sys/class/leds/led0/trigger"
+sudo sh -c "echo 1000 > /sys/class/leds/led0/delay_on"
+
+# Wait for a card reader or a camera
+CARD_READER=$(ls /dev/* | grep $CARD_DEV | cut -d"/" -f3)
+until [ ! -z $CARD_READER ]
+  do
+  sleep 1
+  CARD_READER=$(ls /dev/sd* | grep $CARD_DEV | cut -d"/" -f3)
+done
+
+# If the card reader is detected, mount it and obtain its UUID
+if [ ! -z $CARD_READER ]; then
+  mount /dev/$CARD_DEV $CARD_MOUNT_POINT
+  # # Set the ACT LED to blink at 500ms to indicate that the card has been mounted
+  sudo sh -c "echo 500 > /sys/class/leds/led0/delay_on"
+
+  # Create  a .id random identifier file if doesn't exist
+  cd $CARD_MOUNT_POINT
+  if [ ! -f *.id ]; then
+    touch $(date -d "today" +"%Y%m%d%H%M").id
+  fi
+  ID_FILE=$(ls *.id)
+  ID="${ID_FILE%.*}"
+  cd
+
+  # Set the backup path
+  BACKUP_PATH=$STORAGE_MOUNT_POINT/"$ID"
+
+  # Log the output of the lsblk command for troubleshooting
+  sudo lsblk > lsblk.log
+  
+  # Perform backup using rsync
+  rsync -av --exclude "*.id" $CARD_MOUNT_POINT/ $BACKUP_PATH
+
+  # Geocorrelate photos if a .gpx file exists
+  cd $STORAGE_MOUNT_POINT
+  if [ -f *.gpx ]; then
+    GPX="$(ls *.gpx)"
+    exiftool -overwrite_original -r -ext jpg -geotag "$GPX" -geosync=120 .
+  fi
+
+  # Turn off the ACT LED to indicate that the backup is completed
+  sudo sh -c "echo 0 > /sys/class/leds/led0/brightness"
+fi
+# Shutdown
+sync
+shutdown -h now