mirror of
https://github.com/seahu/rflink.git
synced 2025-12-10 16:07:23 +01:00
123 lines
4.7 KiB
Markdown
123 lines
4.7 KiB
Markdown
# About
|
|
|
|
Modification RFlink for run on raspberryPI. ( http://www.nemcon.nl/blog2/ )
|
|
This modification enable connect RF tranceiver and receiver directly into free raspberryPI pins.
|
|
Instead comunication with serial port use TCP conecction.
|
|
This modification use interrupt and theaders for reduce cpu load.
|
|
|
|
## Compile and install
|
|
#### Compile
|
|
First you have to install the [wiringpi](https://projects.drogon.net/raspberry-pi/wiringpi/download-and-install/) library (also you can install by: apt-get install wiringpi).
|
|
After that you can compile on this directory by executing *make* . This generate one execute file RFlink who you can run.
|
|
|
|
#### Install
|
|
After taht you can copy RFlink into /opt/rflink and install initialization stript as standart linux daemon by *make install*.
|
|
If you can automaticaly start this daemon after start system than type *make autostart_on*.
|
|
Addions plugins may by add into standart diractory *../Plugins* and enableb in *../Config/Config_02.c* (you can change config file into *./Makefile* by edit varibale CONFIG_PLUGINS).
|
|
|
|
## Run from comandline
|
|
Use:
|
|
```
|
|
*sudo /opt/rflink/RFlink*
|
|
*sudo /opt/rflink/RFlink TCP_port_number*
|
|
*sudo /opt/rflink/RFlink TCP_port_number log_level_number*
|
|
*sudo /opt/rflink/RFlink TCP_port_number TX_PIN RX_PIN*
|
|
*sudo /opt/rflink/RFlink TCP_port_number TX_PIN RX_PIN log_level_number*
|
|
or *sudo /opt/rflink/RFlink -h* for this help
|
|
|
|
TCP_port_number: 1-65535
|
|
log_level number: 0-nothing, 1-error log, 2-warning, 3-running status, 4-debug
|
|
TX_PIN - transmitter pin (by wiringpi numbering)
|
|
TR_PIN - receiver pin (by wiringpi numbering)
|
|
```
|
|
|
|
For view wiringpi numbering pins run command *gpio readall* or see bellow for numbering raspberryPI v3:
|
|
```
|
|
+-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
|
|
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
|
|
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
|
|
| | | 3.3v | | | 1 || 2 | | | 5v | | |
|
|
| 2 | 8 | SDA.1 | ALT0 | 1 | 3 || 4 | | | 5V | | |
|
|
| 3 | 9 | SCL.1 | ALT0 | 1 | 5 || 6 | | | 0v | | |
|
|
| 4 | 7 | GPIO. 7 | IN | 1 | 7 || 8 | 1 | ALT5 | TxD | 15 | 14 |
|
|
| | | 0v | | | 9 || 10 | 1 | ALT5 | RxD | 16 | 15 |
|
|
| 17 | 0 | GPIO. 0 | IN | 1 | 11 || 12 | 0 | IN | GPIO. 1 | 1 | 18 |
|
|
| 27 | 2 | GPIO. 2 | IN | 0 | 13 || 14 | | | 0v | | |
|
|
| 22 | 3 | GPIO. 3 | IN | 0 | 15 || 16 | 0 | IN | GPIO. 4 | 4 | 23 |
|
|
| | | 3.3v | | | 17 || 18 | 0 | IN | GPIO. 5 | 5 | 24 |
|
|
| 10 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | |
|
|
| 9 | 13 | MISO | IN | 0 | 21 || 22 | 0 | IN | GPIO. 6 | 6 | 25 |
|
|
| 11 | 14 | SCLK | IN | 0 | 23 || 24 | 1 | IN | CE0 | 10 | 8 |
|
|
| | | 0v | | | 25 || 26 | 1 | IN | CE1 | 11 | 7 |
|
|
| 0 | 30 | SDA.0 | OUT | 0 | 27 || 28 | 1 | IN | SCL.0 | 31 | 1 |
|
|
| 5 | 21 | GPIO.21 | IN | 1 | 29 || 30 | | | 0v | | |
|
|
| 6 | 22 | GPIO.22 | IN | 1 | 31 || 32 | 0 | IN | GPIO.26 | 26 | 12 |
|
|
| 13 | 23 | GPIO.23 | IN | 0 | 33 || 34 | | | 0v | | |
|
|
| 19 | 24 | GPIO.24 | IN | 0 | 35 || 36 | 1 | OUT | GPIO.27 | 27 | 16 |
|
|
| 26 | 25 | GPIO.25 | IN | 0 | 37 || 38 | 0 | OUT | GPIO.28 | 28 | 20 |
|
|
| | | 0v | | | 39 || 40 | 0 | IN | GPIO.29 | 29 | 21 |
|
|
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
|
|
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
|
|
+-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
|
|
|
|
PS: rigt columb is wPi
|
|
```
|
|
|
|
## run as daemon (service)
|
|
|
|
#### Start
|
|
*/etc/init.d/rflink start*
|
|
|
|
#### Stop
|
|
*/etc/init.d/rflink stop*
|
|
|
|
### Configure
|
|
*edit file /etc/rflink.conf*
|
|
|
|
#### defult values:
|
|
|
|
port: 5050
|
|
|
|
log level: 4
|
|
|
|
PIN_TX: 28
|
|
|
|
PIN_RX: 29
|
|
|
|
## Test
|
|
1. run with default values */opt/rflink/RFlink* or own config values etc. */opt/rflink/RFlink 5050 28 29 4*
|
|
2. run *telnet localhost 5050*
|
|
|
|
you can see:
|
|
> pi@raspberrypi:~ $ telnet localhost 5050
|
|
> Trying ::1...
|
|
> Trying 127.0.0.1...
|
|
> Connected to localhost.
|
|
> Escape character is '^]'.
|
|
> 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R33;
|
|
|
|
try type:
|
|
> 10;PING;
|
|
|
|
you may get:
|
|
> 20;10;PONG;
|
|
|
|
if RFlink detect RF activity you can get something like that:
|
|
> 20;14;FA500;ID=0a00;SWITCH=0a00;CMD=OFF;
|
|
|
|
for end connection type:
|
|
> 10;REBOOT;
|
|
|
|
|
|
## Note
|
|
|
|
This tested only witch 433MHz receiver. And tested only with free aviable modules, full version contain much more no tested plugins.
|
|
|
|
|
|
### Autor
|
|
Ing. Ondrej Lycka (ondrej.lycka(at)seznam.cz)
|
|
www.seahu.cz
|
|
|
|
### Licence
|
|
GNU
|